Home | |
Ideal for small flat or sloping
roof windows in any room
The SkyFit™ blind is a fantastic solution for small flat roof or sloping windows.
Blackout Colour Options
Thermal Colour Options
Pips are attached to the fabric to ensure
the blinds stays securely within the
runners at all times.
These create a barrier between the blind
and the window frame, blocking out
light and reducing heat loss.
To ensure correct operation and full black out performance the blind can only work within limited window reveal tolerances i.e. the window must be as square as possible, fitting a blind into or on the edge of a window recess outside of the stated tolerances will lead to poor operation, reduced black out performance and or product damage.
The cassette will always be made to the top width (X1)
The widths X2 and X3 Can have no more than +/- 6mm variation from the top width.
The height measurements Y1, Y2 and Y3 must not have a variation of more than +/- 6mm.
The blind is operated via a spring tension system using the handle at the bottom of the blind. The blind simply pulls down through the siderails locking whenever the handle is released, the handle is then pushed in towards the window releasing the lock which enables the cassette to retract the fabric.
If you can reach the ceiling you can operate the blind with your hand, if not, the SkyFit™ blind comes with a FREE 1m-2m telescopic pole. Additional poles are £30 each.
Handle ends (brakes)
All our products are manufactured using aluminium and glass reinforced nylon components, they do not present any corrosion problems in normal working environments. If there is a failure of a blind,
a component can be replaced without the need for a new complete blind.
To keep the blind looking it’s best through time the customer must ensure the product has been installed and operated securely
and correctly, the fabric can be cleaned with a synthetic or feather duster and can be wiped lightly with a damp cloth.